Type II — High-Pressure第 136 / 240 题
A technician notices R-410A gauge pressures running much higher than an equivalent R-22 system at the same conditions. What does this reflect about R-410A?
a.R-410A is a low-pressure refrigerant
b.The gauges are miscalibrated for R-410A
c.R-410A operates at significantly higher pressures than R-22, so higher-rated gauges and components are required
d.R-410A must be charged as a vapor to lower pressure
解析
R-410A operates at roughly 50 to 70 percent higher pressures than R-22 at the same temperatures, which is normal for that refrigerant. Because of this, R-410A systems require gauges, hoses, and components rated for the higher pressures. R-410A is a high-pressure refrigerant, and using R-22-rated tools on it can be unsafe.
免费刷完整 240 道题库 — 无需注册。
同考点相关题目
- A technician fills a DOT recovery cylinder with recovered R-22. To prevent a dangerous hydrostatic rupture, the cylinder must not be filled beyond what fraction of its capacity?
- A technician needs to locate a small refrigerant leak on an R-22 condensing unit. Which method is a recognized leak-detection technique?
- A technician pressure-tests a repaired R-410A system for leaks before evacuating. Which gas is appropriate for pressurizing the system for a leak test?
- A technician plans to retrofit an old R-22 system to an HFC blend that uses polyolester (POE) oil. Which statement about the retrofit is correct?
- A technician handles a high-pressure refrigerant cylinder in a hot truck bed in summer. Which practice is safest for storing and transporting the cylinder?
- A technician sets up push-pull recovery on a system with a large liquid charge. How does the push-pull method work?