Type III — Low-Pressure第 180 / 240 题
The rupture disk on a low-pressure appliance should be:
a.Removed during recovery
b.Adjusted to a higher setting for leak testing
c.Replaced with a plug for service
d.Kept sound and never bypassed
解析
The rupture disk is a critical safety device protecting the low-pressure shell and must be kept in good condition and never bypassed, plugged, or adjusted. Test pressure must stay below its typical 15 psig setting, which is why 10 psig is the leak-test limit. Tampering with it endangers the technician and the equipment.
免费刷完整 240 道题库 — 无需注册。
同考点相关题目
- Low-pressure chillers most commonly use which type of compressor?
- If a low-pressure chiller's high-pressure limit control trips during operation, the technician should first:
- When recovering from a low-pressure chiller with a large charge, the most efficient practice is to:
- A device that automatically maintains the correct refrigerant level between the condenser and evaporator of a low-pressure chiller is the:
- HCFC-123 requires good ventilation during service primarily because it:
- Before opening a low-pressure chiller to replace a failed tube bundle, the technician must: