Recovery & Recycling第 235 / 240 题
A refrigerant recovered from an appliance still contains oil, moisture, and acid. To make it usable again on-site, the technician would:
a.Do nothing; it is ready to use
b.Recycle it through an oil separator and filter-driers
c.Vent and replace it
d.Reclaim it in a lab
解析
Recycling equipment with an oil separator and filter-driers reduces oil, moisture, and acidity so recovered refrigerant can be reused on-site with the same owner. Reclamation to AHRI 700 requires a certified reclaimer and is needed for resale. Venting is never allowed.
免费刷完整 240 道题库 — 无需注册。
同考点相关题目
- Why is identifying the refrigerant before recovery especially important today?
- Which sequence correctly lists the three processes from least to most thorough?
- Storing a filled recovery cylinder in a hot vehicle trunk in summer is dangerous mainly because:
- Using recovery equipment made after November 15, 1993, an appliance using CFC-12 and holding less than 200 pounds must be evacuated to:
- The primary reason recovery cylinders are color-coded gray with a yellow top is to:
- Recovering refrigerant to the required evacuation level is required before a technician may: