Type II — High-PressureQuestion 138 of 240
A technician handles a high-pressure refrigerant cylinder in a hot truck bed in summer. Which practice is safest for storing and transporting the cylinder?
a.Leave it in direct sun to keep pressure high
b.Fill it to 100% so no air gets in
c.Store it lying on its side near an open flame
d.Keep it out of direct sun and below its temperature rating, secured upright, and never over 80% full
Explanation
High-pressure cylinders should be kept out of direct sun and below their temperature rating, secured upright, and never filled beyond 80% of capacity, because heat raises internal pressure and overfilled cylinders can rupture. Direct sunlight and heat sources dangerously increase pressure. Cylinders must also be kept away from open flames and secured so they cannot fall.
Practice all 240 questions free — no signup required.
Related questions on this topic
- A technician pressure-tests a repaired R-410A system for leaks before evacuating. Which gas is appropriate for pressurizing the system for a leak test?
- A technician notices R-410A gauge pressures running much higher than an equivalent R-22 system at the same conditions. What does this reflect about R-410A?
- A technician plans to retrofit an old R-22 system to an HFC blend that uses polyolester (POE) oil. Which statement about the retrofit is correct?
- A technician sets up push-pull recovery on a system with a large liquid charge. How does the push-pull method work?
- A very-high-pressure appliance using R-13 must have its refrigerant recovered before service. Using recovery equipment made after November 15, 1993, what is the required evacuation level?
- A technician measures 12°F of superheat on a fixed-orifice R-22 system but the manufacturer's chart calls for 20°F at those conditions. What does the low superheat suggest?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against EPA Section 608 Technician Certification Exam · How we review