Electrical (A6)Pregunta 64 de 120
Technician A says a voltage-drop test across a battery cable can reveal unwanted resistance. Technician B says a voltage-drop test is more accurate than a visual inspection for finding poor connections. Who is correct?
a.Technician A only
b.Technician B only
c.Both A and B
d.Neither A nor B
Explicación
A voltage-drop test measures the voltage lost across a connection under load, so high drop reveals corrosion or loose connections that a visual check may miss. Both technicians are correct. Acceptable drop is typically a few tenths of a volt or less.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Using Ohm's law, a 12-volt circuit with 4 ohms of resistance will carry a current of:
- A fully charged 12-volt lead-acid battery at rest should read approximately:
- Technician A says the charging system voltage at the battery with the engine running should typically be around 13.5 to 14.5 volts. Technician B says it should read exactly 12.6 volts while running. Who is correct?
- Two 6-ohm resistors connected in parallel produce a total resistance of:
- An open in a series circuit will cause:
- A starter that cranks slowly, with the battery known good and fully charged, most likely has:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos