Engine Repair (A1)Pregunta 8 de 120
Which cooling-system component regulates coolant flow based on engine temperature?
a.Water pump
b.Radiator cap
c.Heater core
d.Thermostat
Explicación
The thermostat stays closed until the engine reaches operating temperature, then opens to allow coolant to circulate through the radiator. A stuck-closed thermostat causes overheating; a stuck-open one causes slow warm-up and poor heater output. It is a common, inexpensive cause of temperature complaints.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Technician A says the PCV system routes crankcase blow-by vapors into the intake to be burned. Technician B says a stuck PCV valve can cause rough idle or oil leaks. Who is correct?
- A mechanic measures cylinder taper by comparing bore diameter at the top of ring travel to the bottom. This measurement is taken with a:
- Technician A says low oil pressure only at idle on a high-mileage engine can be caused by worn bearing clearances. Technician B says a worn oil pump or diluted oil can also lower pressure. Who is correct?
- A radiator pressure cap raises the system's boiling point primarily because:
- Blue smoke from the exhaust under acceleration most often indicates:
- Technician A says timing-chain stretch can retard valve timing and set a camshaft/crankshaft correlation code. Technician B says a stretched timing chain has no effect on engine performance. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos