Heating & A/C (A7)Pregunta 85 de 120
The expansion valve or orifice tube controls:
a.Compressor speed
b.Blower motor voltage
c.The flow of refrigerant into the evaporator, causing a pressure drop
d.Cabin air recirculation
Explicación
The metering device drops the refrigerant pressure and controls flow into the evaporator, allowing it to boil and absorb heat. A restricted orifice or stuck valve causes poor cooling and abnormal pressures. It separates the high side from the low side of the system.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- The component that changes high-pressure refrigerant vapor into a liquid by removing heat is the:
- The evaporator in the passenger compartment:
- Technician A says overcharging an A/C system improves cooling. Technician B says overcharging raises system pressures and can reduce cooling and damage the compressor. Who is correct?
- The desiccant in a receiver-drier or accumulator is used to:
- Technician A says a low refrigerant charge typically shows low readings on both gauges with poor cooling. Technician B says the leak should be repaired before recharging to the correct weight. Who is correct?
- Technician A says cabin heat comes from engine coolant flowing through the heater core. Technician B says a leaking heater core can fog the windshield and leave a sweet smell. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos