Vehicle InspectionPregunta 20 de 120
You notice oil or grease on the outside of a brake drum during your walkaround. Why does this matter?
a.It causes the drum to rust faster
b.Contamination on the friction surfaces greatly reduces braking power
c.It makes the wheel bearings spin too freely
d.It prevents the ABS light from working
Explicación
Oil or grease on brake linings and drums destroys the friction the brake depends on, so stopping distance increases sharply and braking can become uneven. Rust, bearing speed, and the ABS lamp are unrelated to contaminated friction surfaces.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- At what pressure should the air compressor governor normally cut out and stop pumping air?
- You are performing the tug test after coupling. What are you actually checking?
- Which wheel and rim condition requires the vehicle to be taken out of service?
- Which item is checked as part of the in-cab portion of the pre-trip inspection?
- The previous driver's inspection report lists a defect that the shop has certified as repaired. What must you do before driving?
- You are checking slack adjusters on an S-cam brake by pulling the pushrod by hand with the brakes released. What indicates the brakes are out of adjustment?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Commercial Driver's License (CDL) General Knowledge Test · Cómo revisamos