Network ImplementationPregunta 24 de 100
An administrator is terminating a straight-through Ethernet cable using the T568B standard on both ends. Which pin arrangement starts the sequence?
a.White-green, green, white-orange, blue
b.White-orange, orange, white-green, blue
c.White-brown, brown, white-blue, green
d.Orange, white-orange, green, white-green
Explicación
The T568B wiring order begins with white-orange, orange, white-green, blue on pins one through four. Using the same standard on both ends creates a straight-through cable. Mixing T568A and T568B on opposite ends creates a crossover.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Which technology allows a switch to supply electrical power to devices such as IP phones and access points over the data cable?
- When implementing inter-VLAN routing on a single router interface, what configuration is required?
- A wireless network must support the highest client density in a crowded office. Which deployment choice best reduces co-channel interference on 2.4 GHz?
- Which routing protocol is a link-state interior gateway protocol that uses cost based on bandwidth as its metric?
- An engineer configures a static route of last resort. Which destination and mask represent the default route?
- Which protocol prevents Layer 2 switching loops by placing redundant links into a blocking state?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CompTIA Network+ (N10-009) · Cómo revisamos