InstallationPregunta 30 de 110
Refrigerant suction lines on a split system are typically insulated for what reason?
a.To add structural support
b.To prevent refrigerant leaks
c.To reduce heat gain and prevent condensation on the cold line
d.To increase line pressure
Explicación
The suction line carries cold, low-pressure vapor, so it is insulated to limit heat gain that would reduce efficiency and to prevent surface condensation that drips and causes damage. The insulation should be continuous and properly sized. The liquid line is usually left uninsulated unless exposed to extreme heat.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Why must condensate from a condensing furnace or cooling coil be routed to an approved drain?
- A secondary condensate drain pan or float switch is typically required when an air handler is installed where?
- When brazing refrigerant copper line sets, dry nitrogen is flowed through the tubing to accomplish what?
- What is the purpose of maintaining manufacturer-specified clearances to combustibles around a furnace?
- A properly installed refrigerant line set should have the liquid line and suction line sized according to what?
- On a long vertical suction riser, what feature helps ensure compressor oil returns properly?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos