InstallationPregunta 49 de 110
When connecting line-voltage power to an air conditioner, the disconnect switch must be located where?
a.Inside the electrical panel only
b.Within sight of and readily accessible to the outdoor unit
c.In the attic
d.Behind the condenser coil
Explicación
A readily accessible disconnecting means within sight of the outdoor unit allows a technician to safely de-energize the equipment for service. This is both a code requirement and a safety best practice. The disconnect is sized for the unit's electrical load.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the recommended practice for supporting horizontal refrigerant and drain lines?
- Before releasing refrigerant charge into a newly installed line set, the system should be tested and then processed how?
- A gas furnace flue must terminate where?
- What is the purpose of a filter drier installed in the liquid line?
- Return air for a gas furnace must not be taken from which location?
- When mounting an outdoor condenser on a slab, the pad should be installed how?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos