InstallationPregunta 50 de 110
What is the purpose of a filter drier installed in the liquid line?
a.To meter refrigerant
b.To insulate the line
c.To remove moisture and trap contaminants circulating in the refrigerant
d.To increase suction pressure
Explicación
A liquid-line filter drier adsorbs moisture and captures particulate contaminants, protecting the metering device and compressor. It is typically replaced whenever the system is opened for major service. A saturated drier can restrict flow and should be changed.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the recommended practice for supporting horizontal refrigerant and drain lines?
- Before releasing refrigerant charge into a newly installed line set, the system should be tested and then processed how?
- A gas furnace flue must terminate where?
- When connecting line-voltage power to an air conditioner, the disconnect switch must be located where?
- Return air for a gas furnace must not be taken from which location?
- When mounting an outdoor condenser on a slab, the pad should be installed how?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos