RefrigerationPregunta 74 de 110
The saturation temperature corresponding to a measured pressure is found using what?
a.The unit nameplate
b.A duct calculator
c.A pressure-temperature (PT) chart or app for the specific refrigerant
d.The electrical schematic
Explicación
A pressure-temperature chart lists the saturation temperature for each pressure of a given refrigerant. Technicians use it to calculate superheat and subcooling from gauge readings. Each refrigerant has its own PT relationship, so the correct chart must be used.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A refrigerant metering device such as a fixed orifice or TXV creates what effect on the refrigerant?
- Which category of refrigerants is being phased down under regulations due to high global warming potential?
- A compressor that is trying to compress liquid refrigerant returning from the evaporator can suffer what damage?
- When comparing the two sides of an operating system, the discharge line is normally which relative to the suction line?
- A reciprocating compressor changes the refrigerant state by doing what?
- High condenser (head) pressure with normal charge is most often caused by what?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos