Service & TroubleshootingPregunta 76 de 110
A start capacitor differs from a run capacitor in that it is designed to do what?
a.Stay energized continuously
b.Regulate refrigerant flow
c.Provide a high momentary boost of starting torque, then drop out of the circuit
d.Filter the supply air
Explicación
A start capacitor provides a large capacitance boost to start a motor under load and is switched out by a relay once the motor is up to speed. It is not rated for continuous duty. It is used with hard-start kits and certain compressor and motor designs.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the primary function of a run capacitor on a single-phase motor?
- A contactor in an air-conditioning condenser performs what function?
- A typical low-voltage control (thermostat) circuit in residential HVAC operates at what voltage?
- If a condenser fan motor fails while the compressor keeps running, what symptom is most likely?
- Low airflow across an evaporator coil during cooling most commonly causes what?
- SEER (or SEER2) is a rating that describes what?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos