IrrigationPregunta 1 de 100
A rotor sprinkler head throwing water 30 feet is BEST described as which type of irrigation component?
a.A drip emitter for point-source watering
b.A gear-driven rotor for large turf areas
c.A micro-spray for shrub beds
d.A bubbler for tree wells
Explicación
Gear-driven rotors rotate a single stream back and forth and are designed for large open turf areas because of their long throw radius, typically 25 to 50 feet. Drip emitters, micro-sprays, and bubblers all deliver water at much shorter ranges for beds, shrubs, or trees.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Precipitation rate for a sprinkler zone is calculated using which formula?
- A zone has four heads each using 3 GPM covering a total area of 400 square feet. What is the approximate precipitation rate?
- Under California's Model Water Efficient Landscape Ordinance (MWELO), overhead spray irrigation is generally prohibited in landscape areas narrower than what width?
- A reduced pressure principle (RP) backflow assembly is primarily used to protect a potable water supply against what?
- A pressure vacuum breaker (PVB) must be installed at what minimum height relative to the highest downstream sprinkler head or outlet?
- An atmospheric vacuum breaker (AVB) has which key installation limitation?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-27 Landscaping Trade Exam · Cómo revisamos