Surface PreparationPregunta 24 de 100
A previously painted surface shows widespread peeling down to bare wood. What does this MOST likely indicate?
a.The previous paint was too expensive
b.The surface was overly clean
c.A prep or moisture problem such as painting over a dirty, wet, or unprimed surface
d.The paint color was too light
Explicación
Peeling to bare substrate points to an adhesion failure, usually from painting over a dirty, glossy, damp, or unprimed surface, or from underlying moisture. Correcting the cause and properly preparing and priming the wood is required before recoating. Simply repainting without addressing the cause repeats the failure.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Why should exterior wood be checked for moisture content before painting?
- What is 'feathering' when preparing a spot repair on a painted surface?
- When dry-cutting or grinding concrete during prep generates dust, what airborne hazard is of concern under Cal/OSHA?
- Before applying an elastomeric coating to a stucco crack, what prep step is typically needed?
- Why is it important that a masonry surface be fully cured before painting with most coatings?
- What is the correct order of the basic surface-prep steps for a typical repaint?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-33 Painting & Decorating Trade Exam · Cómo revisamos