Surface PreparationPregunta 25 de 100
What is the correct order of the basic surface-prep steps for a typical repaint?
a.Prime, clean, scrape, sand
b.Clean, scrape/remove loose paint, sand/patch, then prime
c.Sand, prime, clean, scrape
d.Prime, sand, clean, scrape
Explicación
A logical prep sequence is to clean the surface, remove loose and failing paint, sand and patch defects, and then prime bare areas. Cleaning first prevents grinding contaminants into the surface, and priming last seals the prepared substrate. Following this order produces a sound base for the finish coats.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Why should exterior wood be checked for moisture content before painting?
- What is 'feathering' when preparing a spot repair on a painted surface?
- When dry-cutting or grinding concrete during prep generates dust, what airborne hazard is of concern under Cal/OSHA?
- Before applying an elastomeric coating to a stucco crack, what prep step is typically needed?
- Why is it important that a masonry surface be fully cured before painting with most coatings?
- A previously painted surface shows widespread peeling down to bare wood. What does this MOST likely indicate?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-33 Painting & Decorating Trade Exam · Cómo revisamos