ApplicationPregunta 63 de 100
What is the correct spray technique for keeping film thickness uniform?
a.Arc the gun in a fanning motion at varying distances
b.Hold the gun perpendicular to the surface at a consistent distance and move at a steady speed with 50% overlap on each pass
c.Hold the gun as close as possible and move very slowly
d.Trigger the gun only at the middle of each pass
Explicación
A uniform film comes from holding the gun perpendicular to the surface, keeping a constant distance, moving at a steady rate, and overlapping each pass by about half. Arcing the gun or changing distance produces uneven thickness and stripes. Triggering at the start and end of each stroke reduces buildup at the edges.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Why should you 'back-brush' or 'back-roll' paint that was sprayed onto rough or porous exterior surfaces?
- What is the purpose of masking and using drop cloths before spraying?
- High relative humidity during application of latex paint tends to do what?
- When brushing trim, why is 'tipping off' with light strokes at the end helpful?
- Why should each coat be allowed to dry for the manufacturer's recommended recoat time before the next coat?
- What is 'cutting in' when painting a room?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-33 Painting & Decorating Trade Exam · Cómo revisamos