SeguridadPregunta 1265 de 1605
For a simple sloping system in Type C soil (and no engineering), the maximum allowable slope is approximately:
a.1/4 horizontal to 1 vertical
b.Vertical (90 degrees)
c.2 vertical to 1 horizontal
d.1.5 horizontal to 1 vertical (about 34 degrees)
Explicación
Type C soil requires the flattest slope: 1.5H:1V (about 34 degrees). Type B is 1H:1V (45 degrees) and Type A is 3/4H:1V (about 53 degrees) under the simple slope option.
Referencia Legal: 29 CFR 1926.652 Appendix BPractica las 1605 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Excavated spoil, materials, and equipment must be kept at least how far back from the edge of an excavation?
- Before entering a trench more than 4 feet deep where a hazardous atmosphere could exist (e.g., near landfill or sewer), the employer must:
- In the OSHA soil classification system, which soil type is the most stable?
- Which condition would require a competent person to take additional precautions such as installing support to prevent an excavation cave-in from adjacent structures?
- Each scaffold and scaffold component must be capable of supporting, without failure, its own weight and at least how many times the maximum intended load?
- At what height above a lower level does fall protection become required for employees on a supported scaffold?
Última revisión: · proceso editorial
Sen Lin, Fundador de PrepPass · Verificado con California CSLB Contractor License Law & Business Exam · Cómo revisamos
Revisado por Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verificar)