EKG AcquisitionPregunta 47 de 100
What does the standardization mark on an EKG tracing indicate when it is 10 mm tall?
a.The machine is calibrated so that 1 millivolt produces a 10 millimeter deflection
b.The paper is running at 10 millimeters per second
c.The patient's voltage is 10 times normal
d.Each large box represents 10 milliseconds
Explicación
Standard calibration is 10 mm per millivolt, printed as a rectangular standardization mark two large boxes tall at the start of the tracing, so that amplitudes can be compared between machines and over time. Paper speed is a separate setting of 25 mm/sec. The mark says nothing about the patient's own voltage, and each large box represents 0.20 second, not 10 milliseconds.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A tracing shows a uniform, thick, fuzzy baseline with small spikes occurring exactly 60 times per second across all leads. What is the most likely cause?
- An anxious, cold patient produces a tracing with irregular jagged spikes that obscure the small waveforms. What artifact is this and what is the best first correction?
- A tracing shows the baseline slowly drifting up and down in a wave pattern that matches the patient's breathing. What should the technician check first?
- At the standard paper speed, how much time does one small box represent, and what is that speed?
- How much time and voltage does one large box on standard EKG paper represent?
- A patient has a hairy chest and oily skin. What is the correct skin preparation before applying chest electrodes?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con NHA Certified EKG Technician (CET) Exam · Cómo revisamos