Branch Circuits & FeedersPregunta 10 de 120
What is the minimum number of 20-ampere small-appliance branch circuits required for the kitchen, pantry, breakfast room and dining room receptacles of a dwelling unit?
a.One
b.Two
c.Three
d.Four
Explicación
At least two 20-ampere small-appliance branch circuits must serve the receptacle outlets in those rooms, and those circuits may not supply other outlets. One circuit is below the minimum, while three or four exceed the code minimum and are design choices rather than requirements.
Referencia Legal: 2023 NEC §210.11(C)(1)Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A 120-volt branch circuit must carry 12 amperes 120 feet with voltage drop held to 3 percent. Using K = 12.9 for copper, what is the smallest conductor that meets the target?
- A feeder supplies 30 amperes of continuous load plus 50 amperes of noncontinuous load. What is the minimum standard overcurrent device rating?
- Which of the following is NOT a standard ampere rating for fuses and inverse-time circuit breakers?
- What is the minimum branch-circuit rating for the receptacle outlets serving a dwelling unit bathroom?
- What is the allowable ampacity of 8 AWG copper Type NM cable?
- A feeder supplies a 100-ampere continuous load. Using 75 degrees C terminations and copper THWN, what is the minimum feeder conductor size?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Journeyman Electrician Licensing Exam (NEC-based) · Cómo revisamos