Fixtures & Water HeatersPregunta 79 de 120
A public restroom is fitted with metering faucets. What is the maximum volume of water each faucet may deliver per metering cycle?
a.0.25 gallon
b.0.5 gallon
c.1.0 gallon
d.0.125 gallon
Explicación
Public metering faucets are limited to 0.25 gallon per metering cycle, which is a volume limit rather than a flow rate limit because the valve shuts itself off. 0.5 gallon and 1.0 gallon are urinal flush volumes, not faucet cycle volumes. 0.125 gallon is half the allowance and is not a code figure.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A 3/8 inch indirect waste tube from a beverage dispenser discharges over an open receptor. Applying the air gap rule, what is the required air gap?
- A laundry standpipe for a residential clothes washer is roughed in with the top of the standpipe 14 inches above the trap weir. Is the installation acceptable?
- A showerhead is rated at the maximum allowable flow. A user showers for 8 minutes. Assuming the head flows at its rated maximum, how much water is used?
- A closet flange is set on a wood subfloor before the finished tile is installed, and the installer plans to seal the closet to the flange. Which practice is correct?
- A restaurant installs a grease interceptor sized for 30 minutes of retention. If the connected fixtures produce a peak flow of 25 gallons per minute through the flow control device, what liquid capacity does the retention rule call for?
- A grease interceptor is inspected and found to contain accumulated grease and settled solids filling 25 percent of the total liquid depth. What action does the common maintenance standard require?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Journeyman Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos