SafetyPregunta 106 de 110
On a California jobsite, a trench 5 ft or deeper in which workers will enter also requires a specific state permit beyond federal rules. What is that requirement?
a.No permit is ever required in California
b.A Cal/OSHA excavation/trench permit for trenches 5 ft or deeper that workers enter
c.A federal permit only
d.A permit only above 20 ft
Explicación
Cal/OSHA requires a project or annual excavation permit for trenches 5 ft or more deep into which a person must descend, in addition to the cave-in protection rules. California often has requirements at least as strict as, and sometimes stricter than, federal OSHA. The competent person and daily inspections still apply.
Referencia Legal: Cal/OSHA T8 1541Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A 2,000 lb cast-iron section is lifted by a two-leg sling with each leg at 60 degrees from horizontal. Each leg carries (load / 2) / sin(60 degrees), with sin(60) about 0.866. What is the tension in each sling leg?
- During sewer confined-space work, the attendant outside must maintain what capability?
- A trench 10 ft deep in Type B soil is sloped at 1 to 1 (horizontal to vertical) on both sides. If the trench bottom is 3 ft wide, how wide is the excavation at the top?
- A trench 90 ft long and 6 ft deep requires egress so no worker travels more than 25 ft laterally to a ladder. A ladder placed mid-run protects 25 ft in each direction, or 50 ft total. What is the minimum number of ladders required?
- Before servicing a sewage ejector pump, the plumber must control hazardous energy. What procedure prevents the pump from starting during service?
- Cutting and grinding cast iron or concrete for a plumbing penetration generates respirable crystalline silica. What is the primary control the plumber should use?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Master Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos