AdministrationPregunta 80 de 110
A plumbing job has a direct cost of $9,000. The contractor wants a 20 percent profit margin measured on the selling price (not markup on cost). Using price = cost / (1 - margin), what is the selling price?
a.$10,800
b.$11,000
c.$13,500
d.$11,250
Explicación
Price = 9,000 / (1 - 0.20) = 9,000 / 0.80 = $11,250. A margin is figured on the selling price, so you divide by one minus the margin rather than simply adding 20 percent to cost. Adding 20 percent as a markup would give only $10,800 and miss the intended margin.
Referencia Legal: UPC §103.0Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- During construction the plumbing is inspected in stages. Which sequence correctly orders the common inspections?
- A DWV rough-in is water tested. The test fills the system with water to create a 10 ft head at the lowest point. Using 0.433 psi per foot, what pressure does a 10 ft water column exert at the base, and what does the test prove?
- On an isometric, a 45-degree offset must clear an obstruction, producing a 24 in vertical offset. For a 45-degree fitting the travel (diagonal) length equals the offset times 1.414. What is the travel length of pipe between the two fittings?
- A master plumber estimates a job. A takeoff lists 260 ft of 3/4 in copper, 40 ft of 1 in copper, and 18 fittings. What is the estimator computing at this stage?
- A plumbing contractor prices a job using material of $4,200 and labor of $6,000, then adds 15 percent overhead and 10 percent profit on the combined cost. What is the approximate bid price?
- A rough-in inspection fails because a required cleanout was omitted at the base of a stack. What is the master plumber's correct response?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Master Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos