SafetyPregunta 94 de 110
A trench is 3 ft wide, 6 ft deep, and 40 ft long. How many cubic yards of spoil are generated (27 cubic feet per cubic yard), a figure needed to plan the 2 ft edge setback and haul-off?
a.8.9 yd^3
b.26.7 yd^3
c.17.8 yd^3
d.32.0 yd^3
Explicación
Volume = 3 x 6 x 40 = 720 ft^3, and 720 / 27 = 26.7 cubic yards of spoil. This volume determines how much material must be set back at least 2 ft from the edge or hauled away so its surcharge load does not collapse the wall. Underestimating spoil crowds the edge and endangers workers.
Referencia Legal: 29 CFR 1926.651Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- An excavation for a sewer lateral is dug to a depth of 6 ft in Type C soil. At what depth does OSHA require protective systems (sloping, shoring, or a trench box) for workers entering the trench?
- A trench is dug in Type C soil, which OSHA requires to be sloped at 1.5 to 1 (horizontal to vertical). For a trench 8 ft deep, how wide must the sloped opening be beyond the trench bottom on each side?
- A plumber must enter a sanitary sewer manhole to make a connection. This is a permit-required confined space. What atmospheric hazard is the leading concern, and what is required before entry?
- Before entry, a manhole 4 ft in diameter and 12 ft deep must be purged with 5 air changes. Using volume = 0.785 x diameter^2 x depth (about 151 ft^3), what total air volume must be moved to complete the purge?
- A plumber sets an extension ladder to reach a roof vent terminal. Using the 4-to-1 rule, how far should the base be from the wall if the ladder contacts the wall 16 ft up?
- Backflow prevention is a public-health safety requirement. What health event does a properly working backflow assembly prevent?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Master Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos