SterilizationPregunta 48 de 100
An ozone sterilization system is being introduced. Which statement about ozone sterilization is accurate?
a.Ozone is generated from ethylene oxide and requires the same aeration as EO
b.Ozone sterilizes at 270 degrees F and can replace steam for textile packs
c.Ozone is used primarily for oils, powders, and anhydrous materials
d.Ozone is generated on demand from oxygen and water, sterilizes at low temperature, and reverts to oxygen with no toxic residue
Explicación
Ozone sterilizers create the sterilant on site from medical-grade oxygen and water, which removes the need for stored chemical cartridges, and the ozone converts back to oxygen at the end of the cycle. It is a low-temperature method for heat-sensitive and moisture-sensitive devices, not a steam substitute for textiles. Dry heat, not ozone, is the method for oils and powders, and ozone is unrelated to ethylene oxide.
Referencia Legal: AAMI ST79Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Why must every ethylene oxide load undergo an aeration phase before items are released?
- A tray wrapped in a cellulose-based (paper) wrapper is about to be loaded into a hydrogen peroxide gas plasma sterilizer. What is the problem?
- What are the byproducts of a hydrogen peroxide gas plasma sterilization cycle, and what does this mean operationally?
- A department is deciding which sterilization method to use for a heat-stable stainless steel instrument set. Which method should be selected and why?
- A technician receives a jar of petroleum-based lubricant and a container of powder that must be sterilized. Which method applies, and what are representative parameters?
- Rigid sterilization containers are being loaded into a steam sterilizer along with wrapped trays. What is correct practice?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con HSPA Certified Registered Central Service Technician (CRCST) Exam · Cómo revisamos