Chương 6 / 812% của kỳ thi

Electronics Information

Electronics Information tests knowledge of electrical principles, circuits, and components. Questions cover current, voltage, resistance, and common parts like resistors, capacitors, and diodes. This subtest is not part of the AFQT but is important for electronics and technical military careers. Understanding Ohm's law and the roles of basic components is central to a good score.

Basic Electrical Quantities

Electricity is described by a few core quantities, each with its own unit. Knowing these units and what they measure is fundamental.

Voltage in volts

Voltage is the electrical pressure that pushes current through a circuit, measured in volts.

Current in amperes

Current is the flow of electric charge, measured in amperes, often called amps.

Resistance in ohms

Resistance opposes the flow of current and is measured in ohms.

Power in watts

Electrical power is the rate of energy use, measured in watts and equal to voltage times current.

Ohm's Law and Circuit Calculations

Ohm's law ties voltage, current, and resistance together and is the most tested relationship in this subtest.

State Ohm's law

Voltage equals current times resistance, written as V equals I times R.

Solve for current

Rearrange to current equals voltage divided by resistance to find current.

Calculate power

Power equals voltage times current, giving the watts a device uses.

Apply the formulas

Substitute the known values, such as 12 volts and 4 ohms, to find the missing quantity like 3 amperes.

Circuit Types and Components

Circuits can be arranged in series or parallel, and each common component has a specific job. Recognizing them answers many questions.

Add series resistances

In a series circuit, resistances add directly, so two 10-ohm resistors total 20 ohms.

Understand parallel circuits

In a parallel circuit, the total resistance is less than the smallest single resistor.

Identify components

A resistor limits current, a capacitor stores charge, and a diode allows current in only one direction.

Know protective devices

A fuse breaks the circuit when current gets too high to prevent damage.

Conductors, Insulators, and Safety

Materials differ in how well they carry current, and safe handling of electricity depends on knowing which is which.

Recognize good conductors

Copper is an excellent conductor and is widely used in wiring.

Recognize insulators

Rubber, glass, and plastic resist current and protect against shock.

Understand AC and DC

Alternating current reverses direction periodically, while direct current flows steadily one way.

Know the transformer's role

A transformer steps AC voltage up or down for efficient power transfer.

Kiểm tra kiến thức của bạn

Câu hỏi luyện tập về Electronics Information

Mechanical Comprehension

Last updated: September 2026

Học theo trình tự?

Luyện tập vẫn miễn phí. Trọn bộ hướng dẫn ASVAB là chính phần kiến thức, dạy từ đầu đến cuối — tệp PDF + EPUB tải về, thuộc về bạn.

Nhận sách — $19.99