Core TradesCâu 31 / 700
A sediment trap (drip leg) installed in the gas supply just ahead of an appliance functions PRIMARILY to:
a.Catch moisture and debris before they reach the appliance controls
b.Reduce the gas pressure to the appliance
c.Vent excess gas to the outdoors
d.Serve as the required appliance shutoff valve
Giải thích
The sediment trap is a short capped extension that collects dirt and condensate so they do not clog the appliance valve or orifices. It does not regulate pressure, vent gas, or replace the shutoff valve.
Trích dẫn luật: 2025 CA Plumbing Code (CPC) Chapter 12 (Fuel Gas)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A cleanout on a 4-inch drain line must have a MINIMUM clearance in front of it for rodding of about:
- When strapping a tank-type water heater against seismic movement, the lower strap must be placed at least how far above the water heater's controls (thermostat/burner)?
- When sizing fuel-gas piping to appliances, the two governing factors are the total gas demand (Btu/hr) and:
- A backwater valve on a building drain is required PRIMARILY where:
- A vent pipe that penetrates the roof in an area without significant snowfall must extend at least how far above the finished roof surface?
- Shower and tub-shower control valves must be pressure-balancing or thermostatic types and are required to limit the water temperature to a MAXIMUM of:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra