Framing & StructuralCâu 352 / 700
CALCULATION: Cement plaster control joints are recommended to divide large wall areas into panels not exceeding 144 square feet. On a wall panel 8 feet tall, at about what horizontal spacing should control joints fall to stay within that limit?
a.6 feet
b.12 feet
c.18 feet
d.24 feet
Giải thích
Area = height x length, so length = 144 / 8 = 18 feet. Control joints spaced about 18 feet apart keep each 8-foot-tall panel at roughly 144 square feet. Six or twelve feet would create smaller panels than required, and 24 feet gives 192 square feet, exceeding the 144-square-foot guideline.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- To transfer shear from a diaphragm or wall into the framing, the connection of sheathing to the boundary members depends MOST on which factor?
- Behind exterior cement plaster (stucco) applied over wood-based sheathing, how many layers of water-resistive barrier does the code generally require?
- A weep screed at the base of a stucco wall must be located at least how far above adjacent surfaces?
- When metal lath for three-coat stucco is fastened to a wood-framed wall, how far should the fasteners penetrate the framing?
- In traditional three-coat stucco over metal lath, the total nominal thickness is about 7/8 inch. Which sequence of coats builds that thickness?
- Fiber-cement lap siding is installed on a wood-framed wall. What clearance is generally required between the bottom edge of the siding and the finished grade or a roof surface below it?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra