Framing & StructuralCâu 448 / 700
How many board feet are contained in 15 framing members that are each nominal 2x10 and 16 feet long? (Board feet per piece = nominal thickness in inches times nominal width in inches times length in feet, divided by 12.)
a.300 board feet
b.350 board feet
c.375 board feet
d.400 board feet
Giải thích
Each piece = (2 x 10 x 16) / 12 = 320 / 12 = 26.67 board feet. Multiplied by 15 pieces = 400 board feet. The other choices result from dropping the piece count or mis-multiplying the thickness-width-length product.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On a wood-framed wall receiving exterior cement plaster (stucco), a weep screed must be installed at the base of the wall at a MINIMUM of how high above adjacent earth and above paved surfaces?
- When metal lath is applied to a wood-framed wall to receive three-coat cement plaster, the lath fasteners should penetrate the framing members by at least approximately how much?
- Where an exterior deck beam bears on a supporting post, what is the BEST practice for the beam-to-post connection?
- Under the raised floor of a dwelling, short stud walls between the foundation and the first-floor framing (cripple walls) exceeding a nominal height must be braced primarily to resist what?
- On a jobsite, prefabricated wood roof or floor trusses must NOT be treated in which of the following ways?
- A residential stairway must rise a total of 105 inches from finished floor to finished floor. Using the maximum allowable riser height of 7-3/4 inches, what is the MINIMUM number of risers, and the resulting even riser height?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra