Lập kế hoạch & Dự toánCâu 386 / 521
What information does a panel schedule provide?
a.The property boundary lines of the site
b.The roof framing plan
c.A list of branch circuits with their breaker sizes and connected loads
d.The plumbing riser layout
Giải thích
A panel schedule lists each circuit number in a panelboard along with breaker size, the load it serves, and phase/pole information used for balancing and calculations. It is unrelated to site boundaries, roof framing, or plumbing.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In the normal permit and inspection sequence, when is the final electrical inspection performed?
- Who is normally responsible for obtaining the electrical permit for a project?
- What is the primary purpose of a single-line (one-line) diagram?
- For a branch circuit, what maximum voltage drop does the NEC recommend for reasonable efficiency?
- A dwelling's total calculated load is 44,000 VA on a 240 V service. What is the smallest standard service rating that will carry this load?
- Electric-vehicle supply equipment is considered a continuous load. At what percentage of its rating must the branch circuit and feeder be sized?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra