InstallationCâu 36 / 110
A package unit differs from a split system in what way?
a.It has no compressor
b.It cannot be used for cooling
c.All major components are contained in a single outdoor cabinet
d.It requires no ductwork
Giải thích
In a packaged unit the compressor, condenser, evaporator, and blower are housed in one cabinet, usually on a roof or slab, connected to the building by ductwork. A split system separates the indoor and outdoor sections and connects them with a refrigerant line set. Each configuration has different installation requirements.
Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On a long vertical suction riser, what feature helps ensure compressor oil returns properly?
- In a split-system heat pump, the outdoor coil functions as the condenser during which mode?
- What is the function of the reversing valve in a heat pump?
- Gas piping for a furnace must be sized primarily to do what?
- What is the purpose of a sediment trap (drip leg) installed near a gas appliance?
- Before a new furnace's electrical connections are energized, the technician should verify what first?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra