InstallationCâu 38 / 110
What is the purpose of a sediment trap (drip leg) installed near a gas appliance?
a.To regulate gas pressure
b.To vent excess gas
c.To catch moisture and debris before they enter the appliance control valve
d.To measure gas flow
Giải thích
A sediment trap, or drip leg, is a short vertical section that captures moisture, rust, and debris carried in the gas stream before they reach the appliance gas valve. This protects the valve and burner orifices from clogging. The CMC requires it on many appliance connections.
Trích dẫn luật: 2022 California Mechanical Code (CMC)Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the function of the reversing valve in a heat pump?
- A package unit differs from a split system in what way?
- Gas piping for a furnace must be sized primarily to do what?
- Before a new furnace's electrical connections are energized, the technician should verify what first?
- Flexible duct connectors at the air handler are commonly used to accomplish what?
- Why should supply and return ducts be sealed with mastic or listed tape at joints?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra