Lập kế hoạch & Dự toánCâu 287 / 360
A restaurant plan calls for eight identical mop-sink rough-ins. Each rough-in needs 1 P-trap, 1 trap adapter, and 2 drop-ear elbows. How many drop-ear elbows go on the takeoff?
a.8
b.10
c.12
d.16
Giải thích
Two drop-ear elbows per rough-in times eight rough-ins equals 2 × 8 = 16. When many identical assemblies repeat, multiply the per-unit fitting count by the quantity. Building a per-assembly parts list first makes repetitive takeoffs fast and accurate.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You are planning the DWV rough-in test. Under the CPC, a water test of the drainage and vent system is applied so that no section is tested with less than how much head of water?
- In estimating pipe for a run, why do experienced estimators add a waste/scrap allowance to the measured length?
- On the plans a valve symbol drawn as two triangles meeting point-to-point (a bowtie) most commonly represents which device?
- While laying out the building drain you reach a 90° change of direction. Under the CPC, what feature is generally required at such a change of direction on the horizontal drain?
- What is the main purpose of a plumbing fixture schedule on a set of plans?
- When sizing the water distribution system for a building, which CPC-recognized method bases pipe sizes on total demand expressed in water supply fixture units and available pressure?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra