Thoát nước, Nước thải & Thông hơiCâu 77 / 360
The minimum trap and drain size for a residential kitchen sink is:
a.1-1/2 inch
b.1-1/4 inch
c.2 inch
d.3 inch
Giải thích
A kitchen sink requires a minimum 1-1/2 inch trap and drain and carries 2 DFU. A 1-1/4 inch trap is too small for a kitchen sink and is used for lavatories. A 2 or 3 inch trap exceeds the minimum requirement for this fixture.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §702.0 (Table 702.1)Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For a 2 inch trap arm, the maximum developed length to the vent is:
- For a 3 inch trap arm, the maximum developed length to the vent is:
- The minimum trap and trap arm size for a lavatory is:
- The minimum trap size for a shower is:
- The maximum vertical distance between a fixture outlet and the trap weir must not exceed:
- Under the CPC, installing two traps in series on a single fixture (double trapping) is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra