Thoát nước, Nước thải & Thông hơiCâu 78 / 360
The minimum trap size for a shower is:
a.1-1/2 inch
b.2 inch
c.1-1/4 inch
d.3 inch
Giải thích
A shower requires a minimum 2 inch trap and drain to handle its flow without backing up. A 1-1/2 or 1-1/4 inch trap is too small and would restrict drainage. A 3 inch trap exceeds the minimum for a single shower.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §702.0 (Table 702.1)Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For a 3 inch trap arm, the maximum developed length to the vent is:
- The minimum trap and trap arm size for a lavatory is:
- The minimum trap and drain size for a residential kitchen sink is:
- The maximum vertical distance between a fixture outlet and the trap weir must not exceed:
- Under the CPC, installing two traps in series on a single fixture (double trapping) is:
- Crown venting, where the vent connects at the top of the trap crown, is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra