Thoát nước, Nước thải & Thông hơiCâu 81 / 360
Crown venting, where the vent connects at the top of the trap crown, is:
a.Prohibited; the vent connection must be at least two pipe diameters from the trap weir
b.Required on all P-traps
c.Allowed on 2 inch traps only
d.Required for floor sinks
Giải thích
Crown venting is prohibited because the vent opening at the crown quickly clogs with grease and debris. The vent must connect to the trap arm at a point at least two pipe diameters downstream of the trap weir. It is not required or allowed on any specific fixture as a crown vent.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §905.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The minimum trap size for a shower is:
- The maximum vertical distance between a fixture outlet and the trap weir must not exceed:
- Under the CPC, installing two traps in series on a single fixture (double trapping) is:
- The use of an S-trap on a fixture is:
- A single wet vent may serve fixtures within a maximum of how many bathroom groups?
- A circuit vent may serve a battery of not more than how many fixtures?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra