Thoát nước, Nước thải & Thông hơiCâu 79 / 360
The maximum vertical distance between a fixture outlet and the trap weir must not exceed:
a.12 inches
b.18 inches
c.24 inches
d.30 inches
Giải thích
The vertical distance from the fixture outlet down to the trap weir (the fixture tailpiece) must not exceed 24 inches. A longer drop increases discharge velocity and can self-siphon the seal. Values of 12 or 18 inches are within the limit but not the maximum, and 30 inches exceeds it.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §1002.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The minimum trap and trap arm size for a lavatory is:
- The minimum trap and drain size for a residential kitchen sink is:
- The minimum trap size for a shower is:
- Under the CPC, installing two traps in series on a single fixture (double trapping) is:
- Crown venting, where the vent connects at the top of the trap crown, is:
- The use of an S-trap on a fixture is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra