In California, the trench cave-in protection requirement mirrors federal OSHA, applying protective systems at depths of:
Giải thích
Section 1541.1(a)(1) requires every employee in an excavation to be protected from cave-ins by an adequate protective system, with two exceptions: excavations made entirely in stable rock, and excavations less than 5 feet deep where a competent person's examination of the ground shows no indication of a potential cave-in. Note that the second exception has two halves and both must hold - a four-foot trench in running sand is not exempt. Option (a) inverts that exception: a competent person can exempt a shallow trench from protection, not authorise an unprotected one at any depth above two feet. Twenty feet (c) is a different rule about WHO designs the system: past that depth Appendix B stops applying and a registered professional engineer must design it. Two feet and ten feet appear nowhere in the standard as triggers.
Trích dẫn luật: 8 CCR §1541.1(a)(1); §1541.1 Appendix B note 3Luyện miễn phí toàn bộ 1632 câu hỏi — không cần đăng ký.
Own the complete CSLB Law & Business guide — PDF + EPUB, $24.99 →
Câu hỏi liên quan cùng chủ đề
- A contractor with 3 employees insists it is 'too small' to need any safety program. The correct response is:
- On a steep-slope roof, workers 6 feet or more above a lower level must be protected by:
- Which practice reduces electrical shock hazards from temporary jobsite wiring?
- Labor Code §6705 adds a California requirement on top of the Construction Safety Orders. When does it apply?
- Certain high-hazard construction work — trenches 5 feet or deeper requiring shoring, and construction of structures more than three stories or 36 feet high — requires the contractor to obtain what from Cal/OSHA before starting?
- A protective system that uses a trench box or shield to protect workers is called:
Cập nhật gần nhất: · quy trình kiểm tra