Under federal OSHA's construction standard, 29 CFR 1926.501, at what height above a lower level does fall protection generally become required?
Giải thích
Federal OSHA sets the general construction fall-protection trigger at 6 feet above a lower level (a). California does not use that number: 8 CCR §1670(a) requires an approved personal fall arrest, fall restraint or positioning system where an employee is exposed to falling in excess of 7 1/2 feet in general construction, and roofing operations are routed instead to §1730, which triggers above 20 feet on a low-slope roof. Six feet does appear in California, but only for residential-type framing under §1716.2(e)(1). (b) 10 feet is the federal scaffold trigger in 1926.451(g)(1), (c) 4 feet is the federal general-industry figure in 1910.28, and (d) 15 feet is the steel-erection figure in 1926.760.
Trích dẫn luật: 29 CFR 1926.501(b)(1)Luyện miễn phí toàn bộ 1632 câu hỏi — không cần đăng ký.
Own the complete CSLB Law & Business guide — PDF + EPUB, $24.99 →
Câu hỏi liên quan cùng chủ đề
- Where must the construction Code of Safe Practices be kept?
- The construction Code of Safe Practices standard also requires periodic 'tailgate' or toolbox safety meetings. How often must these supervisory safety meetings be held?
- A subcontractor claims it does not need a Code of Safe Practices because the general contractor has one. Under Title 8, this is:
- A worker is on an unprotected walking/working surface 8 feet above the ground. Which is an acceptable form of conventional fall protection?
- A personal fall arrest system (PFAS) generally consists of which components?
- Anchorages used to attach personal fall arrest equipment must be capable of supporting at least how much per employee, or be designed with a safety factor of at least two under a qualified person's supervision?
Cập nhật gần nhất: · quy trình kiểm tra