Scaffold platforms must be fully planked or decked, and generally the gap between planks or between the platform and uprights must not exceed:
Giải thích
Platforms must be fully planked or decked between the front uprights and the guardrail supports, and the space between the platform and the uprights must be no more than 1 inch. The only relief runs the other way from what candidates expect: the gap may open to 9 1/2 inches where the employer can demonstrate that a wider space is necessary to fit the platform around the uprights, and the space between adjacent planking units must still be closed up. Two, three and six inches are each wide enough to drop a hammer through onto the crew below or to catch a boot, and none of them appears in the standard as a general allowance.
Trích dẫn luật: 29 CFR 1926.451(b)(1); 8 CCR §1637(f)Luyện miễn phí toàn bộ 1632 câu hỏi — không cần đăng ký.
Own the complete CSLB Law & Business guide — PDF + EPUB, $24.99 →
Câu hỏi liên quan cùng chủ đề
- Each scaffold and scaffold component must be capable of supporting, without failure, its own weight and at least how many times the maximum intended load?
- At what height above a lower level does fall protection become required for employees on a supported scaffold?
- Who must inspect a scaffold before each work shift and after any occurrence that could affect its structural integrity?
- When a scaffold platform is more than 2 feet above or below a point of access, what must be provided?
- Supported scaffold poles, legs, or uprights must be plumb and braced, and generally must rest on:
- When a portable ladder is used to access an upper landing surface, the side rails must extend at least how far above the landing?
Cập nhật gần nhất: · quy trình kiểm tra