Cơ sở, Vệ sinh & Côn trùngCâu 486 / 500
A kitchen with very hard well water sets up a quaternary ammonium sanitizer. What limit does the Food Code place on the water?
a.Hardness of 100 mg/L or less, or as the label allows
b.Hardness of 250 mg/L or less, or as the label allows
c.Hardness of 500 mg/L or less, or as the label allows
d.Hardness of 750 mg/L or less, or as the label allows
Giải thích
A quaternary ammonium solution must be used only in water with 500 mg/L hardness or less, or water no harder than the EPA-registered label allows, and at a minimum temperature of 75°F. Hard water ties up the active ingredient, so a test strip can read low even when the dilution was measured correctly.
Trích dẫn luật: FDA Food Code §4-501.114Luyện miễn phí toàn bộ 500 câu hỏi — không cần đăng ký.
Own the complete ServSafe Food Protection Manager guide — PDF + EPUB, $19.99 →
Câu hỏi liên quan cùng chủ đề
- A dish crew sanitizes utensils by immersion in 171°F water in the third compartment. How long must the utensils stay submerged?
- A three-compartment sink runs a 50 mg/L chlorine solution at 100°F with a pH of 10 or less. What is the minimum contact time?
- A dishwasher mixes a weaker chlorine solution in the 25 to 49 mg/L range. What minimum water temperature does the Food Code set for it?
- An operation uses an iodine sanitizer in its third sink. Which set of conditions does the Food Code require?
- The Supplement to the 2022 Food Code added a requirement about how a sanitizer test kit is used. What does it say?
- The Supplement to the 2022 Food Code defines disinfection separately from sanitizing. What does disinfection do?
Cập nhật gần nhất: · quy trình kiểm tra
Đội ngũ PrepPass · Đối chiếu với ServSafe Food Protection Manager Exam · Quy trình kiểm tra