GeneralPregunta 113 de 120
Technician A says wheel lug nuts can be tightened in any order. Technician B says they should be tightened in a crisscross (star) pattern to the specified torque. Who is correct?
a.Technician A only
b.Technician B only
c.Both A and B
d.Neither A nor B
Explicación
Lug nuts must be tightened gradually in a crisscross pattern to seat the wheel evenly and prevent rotor distortion. Uneven or over-tightening can warp rotors and damage studs. Technician A is incorrect.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- An outside micrometer is used to measure:
- A torque wrench is used to:
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos