GeneralPregunta 115 de 120
Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
a.Technician A only
b.Both A and B
c.Technician B only
d.Neither A nor B
Explicación
A dial indicator measures small linear movements such as rotor runout, crankshaft endplay, and backlash, and the plunger must contact the surface perpendicularly for accuracy. Both technicians are correct. It reads deflection in thousandths of an inch.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A torque wrench is used to:
- Technician A says wheel lug nuts can be tightened in any order. Technician B says they should be tightened in a crisscross (star) pattern to the specified torque. Who is correct?
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
- Proper personal protective equipment when grinding or working with the battery includes:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos