Engine Repair (A1)Pregunta 2 de 120
Technician A says a blown head gasket can allow coolant to enter a cylinder and cause white exhaust smoke. Technician B says it can cause bubbles in the coolant recovery tank from combustion gases. Who is correct?
a.Technician A only
b.Both A and B
c.Technician B only
d.Neither A nor B
Explicación
A failed head gasket can leak both ways: coolant into the cylinder produces white steam-like exhaust, and combustion pressure into the cooling system produces bubbles and possible overheating. Both technicians describe valid symptoms. A cooling-system pressure test and a combustion-gas (block) test help confirm the diagnosis.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A cylinder head is warped beyond specification. Which service is normally required to restore a flat sealing surface?
- A valve that fails to seat fully will most directly cause which condition?
- On an overhead-cam engine, excessive valve lash (clearance) most commonly produces which symptom?
- Technician A says the PCV system routes crankcase blow-by vapors into the intake to be burned. Technician B says a stuck PCV valve can cause rough idle or oil leaks. Who is correct?
- A mechanic measures cylinder taper by comparing bore diameter at the top of ring travel to the bottom. This measurement is taken with a:
- Technician A says low oil pressure only at idle on a high-mileage engine can be caused by worn bearing clearances. Technician B says a worn oil pump or diluted oil can also lower pressure. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos