Electrical (A6)Pregunta 72 de 120
In a wiring diagram, a component shown connected to ground provides:
a.The source of voltage
b.The return path for current back to the battery negative
c.Fuse protection
d.Signal amplification
Explicación
Ground is the return path that completes the circuit back to the battery's negative terminal. A poor ground raises resistance and causes dim lights, erratic operation, or feedback. Diagrams use ground symbols to trace current return paths.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A starter that cranks slowly, with the battery known good and fully charged, most likely has:
- Power (watts) in an electrical circuit is calculated by:
- A parasitic (key-off) battery drain is measured by connecting an ammeter:
- Technician A says a fuse that blows again immediately after replacement indicates a short to ground or an overload. Technician B says repeatedly replacing the fuse will fix the circuit. Who is correct?
- Technician A says a diode allows current to flow in only one direction. Technician B says alternators use diodes to rectify AC into DC. Who is correct?
- Excessive AC ripple voltage measured at the battery with the engine running usually indicates:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos