Electrical (A6)Pregunta 73 de 120
Technician A says a fuse that blows again immediately after replacement indicates a short to ground or an overload. Technician B says repeatedly replacing the fuse will fix the circuit. Who is correct?
a.Technician A only
b.Both A and B
c.Technician B only
d.Neither A nor B
Explicación
A fuse that blows again immediately is protecting the circuit from a short to ground or an overload drawing excess current. Technician B is wrong because the underlying fault, not the fuse, must be repaired. Inspect the wiring for chafing and test the component.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Power (watts) in an electrical circuit is calculated by:
- A parasitic (key-off) battery drain is measured by connecting an ammeter:
- In a wiring diagram, a component shown connected to ground provides:
- Technician A says a diode allows current to flow in only one direction. Technician B says alternators use diodes to rectify AC into DC. Who is correct?
- Excessive AC ripple voltage measured at the battery with the engine running usually indicates:
- Technician A says a relay lets a small control current switch a larger load. Technician B says relays protect switches and allow smaller control wiring. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos