Service & TroubleshootingPregunta 90 de 110
The most likely cause of no cooling when the thermostat calls but the outdoor unit is completely silent is what?
a.Low refrigerant subcooling
b.A dirty air filter
c.A loss of power, a failed contactor, or an open safety/control circuit
d.Excess superheat
Explicación
A silent outdoor unit on a cooling call usually points to an electrical issue: tripped breaker, blown fuse, failed contactor, or an open safety such as a float switch or high-pressure switch. The technician traces control voltage and power to isolate the fault. Refrigerant issues usually still allow the unit to run.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- When measuring the actual airflow of an installed system, which measurement helps diagnose a restrictive duct system?
- A capacitor that reads well below its rated microfarad value should be treated how?
- Recommended routine maintenance to preserve airflow and efficiency includes what?
- A technician measuring compressor amp draw far above the rated load amps (RLA) should suspect what?
- An ECM (electronically commutated motor) blower offers what advantage over a standard PSC motor?
- When a heat pump is stuck in cooling on a heat call, which component is a prime suspect?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos