IrrigationPregunta 17 de 100
A pressure-regulating device is added to a spray head when static pressure is too high. What is the typical target operating pressure for fixed spray heads?
a.About 60 to 70 PSI
b.About 30 PSI
c.About 5 PSI
d.About 100 PSI
Explicación
Fixed spray heads are designed to operate near 30 PSI; much higher pressure causes misting and fogging that drifts away and wastes water. Pressure-regulating heads or in-line regulators bring high static pressure down to the efficient range. Rotors generally run at higher pressures than sprays.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A zone must deliver 18 GPM and the water meter supplies 12 GPM available flow. What is the BEST corrective action?
- A matched precipitation rate (MPR) nozzle set is designed to do what?
- A smart irrigation controller that adjusts run times using local weather data is called what?
- Misting or fogging from spray heads is usually a sign of what condition?
- An irrigation solenoid valve is operated by what signal from the controller?
- Under MWELO, the Maximum Applied Water Allowance (MAWA) is based primarily on which factors?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-27 Landscaping Trade Exam · Cómo revisamos