IrrigationPregunta 19 de 100
An irrigation solenoid valve is operated by what signal from the controller?
a.A low-voltage electrical signal, typically 24 volts AC
b.240 volts AC line power
c.A pneumatic air line
d.A mechanical pull cable
Explicación
Standard automatic irrigation valves use a 24-volt AC solenoid that the controller energizes to open the valve. When the controller sends the low-voltage signal, the solenoid lifts a plunger and hydraulic pressure opens the diaphragm. This low voltage is safer and easier to run underground than line voltage.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A smart irrigation controller that adjusts run times using local weather data is called what?
- A pressure-regulating device is added to a spray head when static pressure is too high. What is the typical target operating pressure for fixed spray heads?
- Misting or fogging from spray heads is usually a sign of what condition?
- Under MWELO, the Maximum Applied Water Allowance (MAWA) is based primarily on which factors?
- Subsurface drip irrigation is especially useful in which situation?
- Cycling a station into several short run times instead of one long run is called cycle-and-soak and mainly prevents what?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-27 Landscaping Trade Exam · Cómo revisamos